 BioMixers |
 BioCIP Top-Entry Mag Drive Mixers |
BioMixers, for closed-vessel applications compatible with Nalgene carboys, culture vessels and other containers with sanitary flanges.
Features Include:
- Compatible with Nalgene carboys, culture vessels and other containers with sanitary flanges
- Mix up to 400 L
- Autoclavable in place
- Non-cytotoxic materials meet FDA requirements Reversible rotation for up- or down-pumping experiments
- LCD display and recording of scaleup parameters including speed, torque, impeller flow and time
- Repeatable digital data entry via splash-proof keypad
- Temperature probe included
- Variable speed
- Available with LIGHTNIN's QAD validation support package
- Backed by LIGHTNIN's 100% process guarantee
|
The BioCIP Top-Entry MagMixers were specifically designed and developed for seal-less mixers.
Features Include:
- Elimination of mechanical seals and associated maintenance
- SIP/CIP in situ cleanable with standard industry-accepted protocols
- Hermetically sealed
- 100% dry running
- No steam condensate barrier required
- Variety of materials of construction for wetted components
- 10 liters to 25,000 capability
- 300 series stainless steel standard
- Variable speed
- Washdown inverter duty motor
- Available with LIGHTNIN's QAD validation support package
- Backed by LIGHTNIN's 100% process guarantee
|
 ECL Mixers |
 EV Mixers |
The new Enhanced Classic Line (ECL) mixer gives our customer an even stronger and more flexible product. Never before has there been a range of mixers offering so much quality and value.
Features Include:
- Direct- and gear-drive mixers for a wide range of mixing applications
- Direct-drive mixers are recommended for dispersing powders and small batch mixing
- Gear-drive mixers feature two available lower speeds and higher torque for use with larger batches and a range of viscosities
- Larger output shaft bearings for longer shafts and longer life
- Positive chuck grips the mixer shaft to prevent unintentional shaft release
|
For single-purpose mixing applications: 1/4-, 1/3-, 1/2- and 3/4-HP models available, Lifetime grease-lubricated gearbox, Switch, cord and plug are standard - no need for hard wiring on single-phase TEFC motors, Oversized bearings provide superior shaft support.
Features Include:
- 1/4-, 1/3-, 1/2- and 3/4-HP models available
- Lifetime grease-lubricated gearbox
- Switch, cord and plug are standard - no need for hard wiring on single-phase TEFC motors
- Oversized bearings provide superior shaft support
- High-flow A310 impeller is standard
- Available with LIGHTNIN's QAD validation support package
- Backed by LIGHTNIN's 100% process guarantee
|
 G-Series Mixers |
 LabMaster Mixers |
The G-Series provides the required process results in laboratory, pilot or small production applications. The NEW Controller can be supplied with or without a digital rpm display.
Features Include:
- NEW! Reversible rotation for up or down pumping experiments
- Patented impellers provide maximum efficiency, with scalable results
- Displays speed, 50 - 2,200 RPM ± 10 RPM
- Splash-resistant, wipe-down design for cleanability
- Worldwide design, single phase 50 or 60 Hz
- Variable speed
- Available with LIGHTNIN's QAD validation support package
- Backed by LIGHTNIN's 100% process guarantee
|
LabMaster Mixers, an advanced laboratory mixer that is versatile and easy to use.
Features Include:
- Excellent for use in small-batch high-viscosity blending up to 400L, gas-liquid contacting, blending and solids suspension applications
- Reversible rotation for up- or down-pumping experiments
- Multiple units can be controlled by a single computer
- Repeatable digital data entry via splash-proof keypad
- LCD display and recording of scaleup parameters including speed, torque, impeller flow and time
- Dual adjustment clamp - repeatable mixer positioning
- Variable speed
- Temperature probe included
- Excellent tool for experimental design and scale-up modeling
- Provided with 3 versatile impellers standard
- Available with LIGHTNIN's QAD validation support package
- Backed by LIGHTNIN's 100% process guarantee
|
|
 Mag Mixer MBI |
 MiniCIP MagMixers |
The LIGHTNIN bottom-entry MagMixer MBI prevents contamination in pharmaceutical and biotechnology processing and storage applications.
Features Include:
- Patented Hyper-Flo bearing design has been proven in independent tests to be more cleanable than sleeve bearing designs.
- Reduced contact points in the Hyper-Flo bearing result in virtually no particulate generation. Read the Oak Grove Technologies research report for more information.
- All in-tank materials meet USP Class VI standards
- Fully SIP or CIP by flooding or spray ball
- Can be run dry for complete drainage during Clean in Place (CIP) cycles
- Bearings can be easily removed for Clean Out of Place (COP) or maintenance
- Bearings are impact-resistant; will not break during rough handling
- Gear-motor with variable speed capability
- Washdown inverter duty gear motor standard
- Available with LIGHTNIN's QAD validation support package
- Backed by LIGHTNIN's 100% process guarantee
|
The LIGHTNIN MiniCIP is designated for smaller lab, pilot, and production vessels. This new mixer is perfect for the laboratory environment where cleanliness and ease of use are mandatory. The new design will allow the user to easily remove the drive and either sterilize and/or autoclave the entire tank without removing the mixer.
Features Include:
- One MiniCIP drive can be used for multiple vessels
- Washdown duty motor assembly, 1-½" Triclover connection
- Small footprint, 3" diameter x 11" tall
- 100% CIP – SIP capable
- Seal-less design, magnetic coupling
- Patented dry running bearings are USP Class VI certified
- 316L construction, 15Ra electropolished wetted parts standard
- Optional materials of construction
- Non-flushed, autoclave design available
- Removable drive, lightweight <10 lbs; use with multiple lower assemblies
- Sanitary or flange mount
- Speed variable 0-500 RPM with panel controller
- Gear motor – 24 VD
|
 Seal Master Mixers |
 SR Sanitary Right Angle Mixers |
This self-contained variable-speed unit provides gentle mixing in sealed vessels up to 200 L.
Features Include:
- Motor and controls are enclosed for "plug and play" design
- Stainless steel surfaces
- NEMA 4 gear drive
- Mechanical seal can be sterilized by SIP methods
- Variable-speed motor operates at 0 to 175 rpm
- Available with LIGHTNIN's QAD validation support package
- Backed by LIGHTNIN's 100% process guarantee
Options Available:
- Available in 1/15 HP
- Air drive motor
- Digital rpm readout (electric motors only)
- NEMA 1 detachable drive and process control interface
- Seal with sanitary gland
- Composite housing
- 150# ANSI flanges in 3-, 5- and 6-in. sizes
- Sanitary flanges in 3-, 4- and 6-in. sizes
|
The ideal compact mixer for sanitary biological, pharmaceutical, cosmetic and food processing applications from 100 to 20,000 liters.
Features Include:
- Designed for media suspension and storage, buffer solutions make down, plasma extraction, fermentation, cell culture and general media processing
- Low headroom (less than 13" tall) right angle gear drive with low center of gravity. Tanks can easily be moved from one location to another with mixer in place
- Designed for SIP/CIP environments in the most stringent cGMP facilities
- Washdown duty or energy efficient inverter duty motor
- VFD available
- Local readout tachometer available
- All stainless or hard anodized aluminum pedestal
- Sealed gearbox with expansion chamber - no breather valve required
- Available with LIGHTNIN's QAD validation support package
- Backed by LIGHTNIN's 100% process guarantee
|
 SVM Mixers |
 Washdown Clamp-Mount Mixers |
The Sanitary Vertical Mini (SVM) Mixers have been engineered for the most critical processes, collectively providing superior performance and clean operation.
Features Include:
- Minimum footprint for vessels from 10 to 500 liters
- 300 series stainless steel housing and pedestal; epoxy-painted drive
- Designed for use in sterilizable environments
- Vertical, in line design for closed tank applications
- Mixer mounts on standard 3" tri-clamp flange
- Full clean-in-place, sterilize-in-place (CIP/SIP) features
- Single mechanical seal available with or without debris well
- Washdown inverter duty gear motor
- Available with LIGHTNIN's QAD validation support package
- Backed by LIGHTNIN's 100% process guarantee
|
Ideal for applications where the mixer is likely to get wet.
- Choice of epoxy-covered aluminum or electroless nickel-plated aluminum construction
- Available in 1725-rpm direct drive, and 280- or 350-rpm gear drive Up to 3/4 HP
- Fully adjustable clamp assembly
- Flexible motor coupling
- Oversized bearings
- Permanently sealed lubrication
- Self-aligning, floating gears
- All openings are sealed or gasketed to prevent liquid infiltration
|
 SSV Mixers |
|
The Stainless Sanitary Vertical (SSV) Mixers are suitable for buffer and media preparation, fermenters, bioreactors, product recovery, and bulk pharmaceutical processing.
Features Include:
- Polished all stainless steel exterior
- Modular construction for ease of service, repair and retrofit
- Minimum footprint for vessels up to 30,000 liters in a vertical, in line design for closed vessel applications
- Standard designs from ¼ to 2 HP, with output speeds from 100 to 290 rpm
- Custom selections available for higher power or alternate speeds
- Full clean-in-place, sterilize-in-place (CIP/SIP) features
- Washdown inverter duty motor
- Available with LIGHTNIN's QAD validation support package
- Backed by LIGHTNIN's 100% process guarantee
|
|
